Blue Eco® Titanium Marine 240W DC Pump
Specially designed saltwater aquarium version of the powerful Blue Eco® 240W DC Pump from SIBO (Netherlands). With true Sine Wave external controller, the Blue Eco® 240W Marine is one of the most efficient, powerful and reliable DC pump you can get. Up to 23.000 l/h
Download operation manual (EN)
The Blue Eco® 240W Marine DC pump is amongst the most energy saving pump worldwide. Blue Eco® pumps consume up to 50 percent less energy, what makes them economically attractive. With the ability of being installed with flexible fittings simpliflies maintenance, but also takes care of a resonance/vibration free and noise suppressing setup.
|The brand new Blue Eco® Titanium pumps are the most ECO friendly electric pumps produced. They utilise brushless DC electric motor technology, and have an efficiency rating of 94.6% - this compares with normal electric motors with have an efficiency of 45 - 50%. The power and therefore energy consumption is fully adjustable from 10 to 100%, so when reducing the R.P.M, energy consumption reduces accordingly.|
Very little heat production (as 94% of the energy used goes to turn the impeller ) which makes them ideal for dry setups or home aquarium applications. The Blue Eco® Titanium pumps are marine water resistant and can be used submersible and also in dry circumstances, even the controller is watertight.
The controller displays power consumption in watts, rpm and running hours. The Blue Eco® 240W Marine DC pump has its own customised controller (designed by Estrad BV). The display shows the hour counter, power consumption, amperage and RPM, but also offers a vast number of messages to indicate problems. It also offers a cruise control option and a full automatic protection against dry running.
All pumps have the possibility for a second, external, control panel for remote controle.
The Blue Eco® Titanium 240W Marine DC pump come complete with controller and a 10 meter saltwater resistant cable.
Blue Eco® Titanium 240W Marine DC Pump features
•All metal parts made of Titanium
•Suitable for wet or dry applications
•100% corrosion resistant
•Lowest power consumption of any similar spec'd pump on the market
•"A" Energy rated
•Can be used submerged
•Can be used in pure marine water
•Fully factory tested
•Complete with 10 meters of high quality saltwater resistant cable
•Control Unit shows Power Used (watts) hour counter and rpm
•All pumps have silicone rubber dampers
•Fully CE approved
•2 years warranty
The rotor is the heart of the driving force and needs to fulfill the highest of demands. The 8 pole rotor is built around the tungsten or titanium shaft. This static and dynamic balanced rotor consists of 16 high quality neodymium super magnets. The rotor is protected by a composite layer of aramid fiber reinforced carbon. Both ends have double shaft seal with smooth bearings which sit in a resonance free silicon bedding. As well as making theses pumps capable of handling seawater it also prevents vibrations which can be sensitive to some invertebrates and koi.
The 27 poles stator not only gives an equal propulsion, due to the True Sine Wave technique it also has an unmatched torque.
The pump housing is made from blended ABS and PC (polycarbonate) that unifies the positive features of both materials. Inside the housing the stator is fully cast in epoxy resin is protected by a strong layer of aramid fiber reinforced carbon.
The power module uses True Sine Wave technology for high reliability. Unlike brushless DC motors with square wave technique, Blue Eco® pumps use True Sine Wave technology for the best features: high efficiency (90%), noise free running, high torque, wide RPM range, CO2 reduction.
For pumps, the bearing system is the most important part for reliability and life span. Blue Eco® pumps have a diamond-hard bearing system of doped silicon carbide with or without the combination of the super strong and durable tungsten. The use of these high quality materials are unique and exclusive for these pumps and guarantee a long and trouble free operation.
The way Blue Eco® pumps are constructed prevents any internal leakage. The rotor rotates in the same water that lubricates the bearings. With a unique rinse-system, different for both models, the water inside will be continuously changed during operation.
The pump is completely waterproof confirming to class IP68 (up to 12 meters of water head). The controller is waterproof up to class IP64 (splash proof). Outdoor use in a covered environment is recommended.
The cables on the Blue Eco® have extra protection for maximum safety in case of damage. The outer mantle is made of TPE and is fully saltwater proof. Due to this cable the pump can be fully submersible in (sea)water.
The controller is developed by Estrad BV and produced under supervision of the University of Shenzen, China. This leading university is working close together with Europe’s biggest companies and universities in this area.
The Blue Eco® pump is the only pump in its class that has both the European CE certifications as well as the German “TÜV Prüfungs and Test Certificate”. This guarantees extra quality and safety.
The University of Shenzen supplies the software for the controllers and every controller is individually checked and certified. Every pump also undergoes an extensive test procedure and comes with its own unique test certificate.
BlueEco 240W Marine curve
The parting line at 240 Watt shows, where the capacity of the 240 Watt pump stops. Above this parting line the values are only valid for the 320 Watt version.
Max power consumption: 240 Watt
Flowrate (min - max): 1.100 l/h to 23.000 l/h
Head: 0,2 to 7 m