LTH100 Lanthanum Reactor (complete)
The use of Lanthanum to completely eradicate phosphate in reef aquariums is a method that is widely spreading over reefers around the world.
The use of Lanthanum to completely eradicate phosphate in reef aquariums is a method that is widely spreading over reefers around the world.
A Lanthanum solution is fed to the reactor with a peristaltic pump via a quick fitting located at the base of the reactor. The doses should be as small and as frequent as possible (i.e. 1 ml/hour/24 hours/day). Flocculation then occurs, which is filtered by the second chamber of the Lanthanum reactor.
Once phosphate is under control, you can still use the reactor as a two-stage fluidized bed reactor, second stage calcium reactor chamber, zeo reactor or any combination.
The two chambers are independent features, this modular design allows for easy cleaning, disassembly and/or media exchanging.
1.) Water IN (Threaded 1/2'' NPT x 20 mm)
2.) LaCl3 in (JG 1/4'')
3.) Check valve
4.) Reaction chamber
5.) Flange
6.) Filter chamber
7.) Water OUT
8.) Lid
9.) Retaining knob
Technical Information
Dimensions (without fittings): Diam. 120 mm x 170 mm x 610 (h)
Footprint: 120 x 120 mm
Water Inlet: 20 mm
Lanthanum inlet: 1/4'' JG speed fitting
Recommended pump: Bypass from return pump
Weight: 2,30 Kg
Operating manual and/or downloadable resources available for this product on the [+] Available downloads tab below.
No customer comments for the moment.